|
|
Build Your Online Product Catalogs?
General Characteristic
The TL-OPUSB-IEC is an optical probe with USB interface,It¡¯s widely applied to meter infrared communication, such as meter data reading and check or more.
The USB pulse read and write photoelectric probe mainly function is to convert optical signal and regard USB port as a serial port.It communicate with those infrared device such as electric energy meters,heat meters,etc. Which also have infrared emission and receiving tube by connecting the both built-in corresponding tube.USB pulse read and write photoelectric probe communicate with electric energy meter through serial operation mode.
Technical Specification
Operating Voltage:4v-5.5v
Operating Current:¨Q100MA
The infrared emission tube center wavelength:940nm
The infrared receiving tube center wavelength:980nm
Support baud rate:300-19200b/s
Communication distance :effective distance vary from1cm to 5cm,according Support baud vary from 300 to 9200n/s
Battery-independent
Conform to IEC62056-21(IEC1107) Communication technology specification.
Use Method
Firstly, insert the USB port of the USB pules read write photoelectric probe in PC.
Secondly, the photoelectric probe aim at infrared device¡¯s infrared communication window(the photoelectric probe with magnet will firmly attracted on the meter).
Thirdly,noting the photoelectric probe pulled in the direction of the meter,the connection is completed.
The appearance of the product
A:Using black round, flexible connection line,length:200cm
B:With ABS fireproof material shell, appearance,no burr,no stain.
C:Ultrasonic welding,closely connected.
D:Product¡¯s shell color is blue gray. |
| Company: |
Zhuhai Telink Communication TechnologyCo.,LTD
|
| Contact: |
Ms. Jenny Jiang |
| Address: |
8F Yongfa Building, Jida |
| Postcode: |
519015 |
| Tel: |
07 56 3371955 |
| Fax: |
07 56 2154439 |
| E-mail: |
|
|
|
|
Home
